The Phoenix Swimsuit - Free Sewing Pattern

Posted on May 30, 2018 by Lee Norris

Whether you need a new bodysuit or an outfit to hit the beach, the Phoenix pattern is the perfect thing to make sure your summer goes swimmingly! You could try it with a jersey or mesh for an everyday look, or check out one of Mood's vibrant new tricot prints for your next swim suit. For this one, I tried the new rope print to give off a chic resort vibe. Plus, it's infused with UV protection and Aloe Vera microcapsules to keep your skin looking flawless this season. How can you go wrong?

Fabrics & materials used:

DOWNLOAD YOUR FREE PATTERN

Simply fill in the form below, verify your email address and you’ll be sent a link to download your free pattern.



Loading...

All seam allowances are 1/2″ unless otherwise stated. See chart below for sizing specifications. Note, this specific pattern is available up to a size 30.

First, trim your power mesh along the side seams so it's 1/4" slimmer than your tricot layer on either side. Pin and stay-stitch the sides of your tricot and mesh layers so the mesh stretches just slightly.

Sew the front and back of your suit together at the side seams. If you don't have a serger, sew the wrong sides of the fabric together first, trim your seam allowance, and then sew the faces of your tricot together to create French seams (seen below).

Do the same at the crotch seam, and your suit should be starting to take shape. Use this moment to fit your garment and take in the sides if need be.

Fold the raw edges of your "armholes" inward 1/2" and zig-zag stitch or serge. Keep in mind, there are no straps on this suit, so the armholes are really just half-circles.

Do the same to finish off the leg holes of your suit, but this time also sew some swimwear elastic along the edge. Stretch the elastic just the slightest amount while pinning.

Place the wrong side of your ruffle along the top of the face of your swim suit. The seam can be placed at the center back of your suit, with the excess portions of the ruffle falling at the sides as armholes.

Trim your seam allowance and finish the top of your ruffle off with some French seams, forming a casing for you to feed some elastic through. Stitch your elastic together at the ends and your suit is ready for the beach!

 

The Phoenix Swimsuit - Free Sewing Pattern - Mood Sewciety
FREE SHIPPING DOMESTIC ORDERS $75+
Home Fashion Sewing The Phoenix Swimsuit – Free Sewing Pattern